no stupid questions thread

Gabe
Posts: 1084
Joined: Fri Mar 27, 2015 3:09 pm
Location: St. Cloud (not the cold one)

no stupid questions thread

Postby Gabe » Mon Aug 30, 2021 3:36 pm

Ashley Furniture is junk, imo. If you have a Rooms to Go where you are, I have had really great luck with them.

MrKennethTKangaroo
Posts: 12493
Joined: Sat Mar 28, 2015 3:50 pm

no stupid questions thread

Postby MrKennethTKangaroo » Mon Aug 30, 2021 3:38 pm

There's a place called Tubbies Bedrooms and Mattress near the mall. That seems legit

dodint
Posts: 59385
Joined: Wed Mar 25, 2015 1:39 pm
Location: Cheer up, bіtch!
Contact:

no stupid questions thread

Postby dodint » Mon Aug 30, 2021 3:40 pm

We bought a bedroom set from Levin a few years ago. One of those made by the Amish collections. When I took it apart to move it much of it was made from the finest screws, staples, and particleboard.

tifosi77
Posts: 51632
Joined: Wed Mar 25, 2015 1:07 pm
Location: Batuu

no stupid questions thread

Postby tifosi77 » Mon Aug 30, 2021 3:51 pm

So long as no electricity was involved.

count2infinity
Posts: 35708
Joined: Tue Mar 24, 2015 2:06 pm
Location: All things must pass. With six you get eggroll. No matter how thin you slice it, it's still baloney.
Contact:

no stupid questions thread

Postby count2infinity » Mon Aug 30, 2021 3:56 pm

We bought a bedroom set from Levin a few years ago. One of those made by the Amish collections. When I took it apart to move it much of it was made from the finest screws, staples, and particleboard.
That’s one of the things I worry about. Buying from a furniture store and the product being no better than Walmart stuff.

PFiDC
Posts: 9248
Joined: Wed Mar 25, 2015 2:23 pm

no stupid questions thread

Postby PFiDC » Mon Aug 30, 2021 4:09 pm

We've had a Sleep Number bed for around 10 years now. Probably time to replace.
Mine lasted 14 years but should have been replaced at least 4 years earlier so that sounds right. I miss it though. I'll definitely buy one again some day.

tifosi77
Posts: 51632
Joined: Wed Mar 25, 2015 1:07 pm
Location: Batuu

no stupid questions thread

Postby tifosi77 » Mon Aug 30, 2021 4:34 pm

Did you have one of the splitty adjustable deals? Ours is a 1-piece flat jobber, and I think we're probably gonna get an adjustable one next.

DigitalGypsy66
Posts: 19759
Joined: Wed Mar 25, 2015 7:33 pm
Location: Iodine State

no stupid questions thread

Postby DigitalGypsy66 » Mon Aug 30, 2021 4:42 pm

I have not purchased bedroom furniture from them, but two office (gaming) chairs and a couch, but I really like Wayfair. My dad bought a bunch of stuff a few years ago - bookshelves, desks, entertainment center - and it was high quality. You do have to assemble it, which sucks.

Customer service was good, too. Our couch was supposed to come in two boxes, and when one never shipped, they expedited the second box and it came the next day.
Last edited by DigitalGypsy66 on Mon Aug 30, 2021 4:43 pm, edited 1 time in total.

shafnutz05
Posts: 50555
Joined: Tue Mar 24, 2015 7:27 pm
Location: A moron or a fascist...but not both.

no stupid questions thread

Postby shafnutz05 » Mon Aug 30, 2021 4:42 pm

Amish furniture is one of the biggest scams out there, and I say that living within 20 minutes of a half dozen places like that. Just look for the "Made in China" label.

PFiDC
Posts: 9248
Joined: Wed Mar 25, 2015 2:23 pm

no stupid questions thread

Postby PFiDC » Mon Aug 30, 2021 4:45 pm

Did you have one of the splitty adjustable deals? Ours is a 1-piece flat jobber, and I think we're probably gonna get an adjustable one next.
Nah this was back in 2006. Didn't even have the number on the remote. I did love that I could move my entire bed in a Honda Accord in one trip though.

I'm still using the frame from my select comfort. Better than a box spring.

PFiDC
Posts: 9248
Joined: Wed Mar 25, 2015 2:23 pm

no stupid questions thread

Postby PFiDC » Mon Aug 30, 2021 4:47 pm

Amish furniture is one of the biggest scams out there, and I say that living within 20 minutes of a half dozen places like that. Just look for the "Made in China" label.
Lol I bet

When I went to Jamaica in 2007 I bought a wooden photo book. When I was there last month one of the vendors, he was maybe 18, tried to sell the same exact book to me and said "I make these at home". No you don't. There's a made in China sticker on the inside of the back cover and I bought one 14 years ago.

MalkinIsMyHomeboy
Posts: 29482
Joined: Wed Mar 25, 2015 1:45 pm
Location: “MIMH is almost always correct” -ulf

no stupid questions thread

Postby MalkinIsMyHomeboy » Mon Aug 30, 2021 4:54 pm

I find the big box names like Rooms to Go and Ashley to be so overpriced

There’s a place near me that orders direct from the manufacturer and transports it to their location themselves so it’s a bit cheaper (I think that’s what they do at least). I’d recommend finding something like it: https://goo.gl/maps/mh8AopQq5CzEyk4Y9

eddy
Posts: 22346
Joined: Thu Mar 26, 2015 9:49 am
Location: Emmet's barn loft

no stupid questions thread

Postby eddy » Mon Aug 30, 2021 5:04 pm

Amish furniture is one of the biggest scams out there, and I say that living within 20 minutes of a half dozen places like that. Just look for the "Made in China" label.
I don't know about this, the Ohio Amish made some of the best mattresses I've ever had the pleasure to sleep on.

NTP66
Posts: 60916
Joined: Sun Oct 04, 2015 2:00 pm
Location: FUCΚ! Even in the future nothing works.

no stupid questions thread

Postby NTP66 » Mon Aug 30, 2021 5:06 pm

Ashley definitely has affordable furniture, but it’s not quality. We checked them out when looking for a new sofa, and left with just a set of wall wine racks. Mealey’s was the same way, but I think they closed all of their stores down a few years back.

eddy
Posts: 22346
Joined: Thu Mar 26, 2015 9:49 am
Location: Emmet's barn loft

no stupid questions thread

Postby eddy » Mon Aug 30, 2021 5:10 pm

I need a new sectional sofa and went to a couple places and it was so **** long to get new furniture in, I just gave up. Need some help here

NTP66
Posts: 60916
Joined: Sun Oct 04, 2015 2:00 pm
Location: FUCΚ! Even in the future nothing works.

no stupid questions thread

Postby NTP66 » Mon Aug 30, 2021 5:24 pm

La-Z-Boy…

nocera
Posts: 42110
Joined: Fri Mar 27, 2015 10:47 am
Location: He/Him

no stupid questions thread

Postby nocera » Mon Aug 30, 2021 5:39 pm

I need a new sectional sofa and went to a couple places and it was so **** long to get new furniture in, I just gave up. Need some help here
Yeeeeep. We bought ours from Macy’s Furniture Gallery in April. It was delivered last week.

faftorial
Posts: 14894
Joined: Tue Nov 05, 2019 10:35 pm
Location: Lengeschder

no stupid questions thread

Postby faftorial » Mon Aug 30, 2021 5:57 pm

Amish furniture is one of the biggest scams out there, and I say that living within 20 minutes of a half dozen places like that. Just look for the "Made in China" label.
I don't know about this, the Ohio Amish made some of the best mattresses I've ever had the pleasure to sleep on.
Pftt, Ohio Amish are lame compared to PA Amish.

nocera
Posts: 42110
Joined: Fri Mar 27, 2015 10:47 am
Location: He/Him

no stupid questions thread

Postby nocera » Mon Aug 30, 2021 6:06 pm

Did you have one of the splitty adjustable deals? Ours is a 1-piece flat jobber, and I think we're probably gonna get an adjustable one next.
We got the split king. My wife is way too excited to raise my head when I start snoring.

MalkinIsMyHomeboy
Posts: 29482
Joined: Wed Mar 25, 2015 1:45 pm
Location: “MIMH is almost always correct” -ulf

no stupid questions thread

Postby MalkinIsMyHomeboy » Mon Aug 30, 2021 6:23 pm

what’s the thought process behind when someone (or maybe more specifically females since they more commonly wear non-wedding rings) decides what finger to wear a (non-wedding) ring?

I’ve never worn one and likely won’t wear a ring until I get married but I was curious

eddy
Posts: 22346
Joined: Thu Mar 26, 2015 9:49 am
Location: Emmet's barn loft

no stupid questions thread

Postby eddy » Mon Aug 30, 2021 6:48 pm

what’s the thought process behind when someone (or maybe more specifically females since they more commonly wear non-wedding rings) decides what finger to wear a (non-wedding) ring?

I’ve never worn one and likely won’t wear a ring until I get married but I was curious
I wear some turquoise rings that have been in the family, and my process was whichever fingers they fit on, I put them on. I realize this probably doesn't help, but you are welcome.

shafnutz05
Posts: 50555
Joined: Tue Mar 24, 2015 7:27 pm
Location: A moron or a fascist...but not both.

no stupid questions thread

Postby shafnutz05 » Mon Aug 30, 2021 6:57 pm

Amish furniture is one of the biggest scams out there, and I say that living within 20 minutes of a half dozen places like that. Just look for the "Made in China" label.
I don't know about this, the Ohio Amish made some of the best mattresses I've ever had the pleasure to sleep on.
Real Amish furniture is definitely well crafted. And not cheap.

meow
Posts: 30565
Joined: Thu Mar 26, 2015 8:53 am
Location: I have four degrees and am a moron. Don’t let that fool you

no stupid questions thread

Postby meow » Mon Aug 30, 2021 7:17 pm

Amish furniture is one of the biggest scams out there, and I say that living within 20 minutes of a half dozen places like that. Just look for the "Made in China" label.
I don't know about this, the Ohio Amish made some of the best mattresses I've ever had the pleasure to sleep on.
What’s the term for “jungle fever” but with Ohio Amish?

tifosi77
Posts: 51632
Joined: Wed Mar 25, 2015 1:07 pm
Location: Batuu

no stupid questions thread

Postby tifosi77 » Mon Aug 30, 2021 7:39 pm

Did you have one of the splitty adjustable deals? Ours is a 1-piece flat jobber, and I think we're probably gonna get an adjustable one next.
We got the split king. My wife is way too excited to raise my head when I start snoring.
When the commercials come on Mrs Tif claps her hands and giggles. :lol:

AuthorTony
Posts: 8961
Joined: Wed Mar 25, 2015 11:18 am

no stupid questions thread

Postby AuthorTony » Mon Aug 30, 2021 7:46 pm

This is probably too specialized to ask here but, whatever.

I'm trying to resize a book cover so I can send it out via my mailing list. I need to get it under 2mb. That should be easy, right? Nope.

In photoshop, I'm resizing this image down to 900x600 pixels, quality 8, and it keeps coming out as a 5mb jpg. I can't understand what in the world is going on. I have photographs that are approx. 6500x4700 and the quality is set at 10 and they're barely larger than 5mb. Even dropping the quality on the cover all the way down to 2 still gives me a 4.5 mb image.

I must be doing something wrong but I sure as heck can't figure out what.

Who is online

Users browsing this forum: faftorial, LeopardLetang, NTP66 and 142 guests