Page 137 of 298

Home Improvement Thread

Posted: Fri Jul 17, 2020 11:20 am
by King Colby
NTP66 those lights are life changing.
I was just gonna post that. Put them in the unfinished portion of my basement and they are great! I was planning on switching my keyless lights to long, led shop lights but I don’t need that now. Thanks NTP66
Mine came yesterday. Can't wait to try them out. I'm thinking two in the utility room of my basement and two in the garage. I have four light bulbs in the garage but thinking I don't need all four of them out there. :lol:
I tried that. Theyre too great so I just bought more instead.

Home Improvement Thread

Posted: Fri Jul 17, 2020 11:21 am
by King Colby
I should have setup an affiliate link for those to get a few pennies from all of these sales.
I already bought a 4 pack a 2 pack and a 1 pack because of you :lol:

Home Improvement Thread

Posted: Sat Jul 18, 2020 3:46 pm
by LITT
So my drawer box is approx 17” wide and the housing is approx 18.5”. I Need .5” play on each side for drawer hardware. Any suggestions on how to accommodate for the other .25” should I make some spacers on the table saw?

Home Improvement Thread

Posted: Sat Jul 18, 2020 9:40 pm
by mac5155
I told my father in law about NTPs lights and he went and doubled down and ordered the 12000 lumens ones for 32 bucks each. :lol:

Home Improvement Thread

Posted: Sat Jul 18, 2020 9:59 pm
by dodint
I ordered a pair.

Home Improvement Thread

Posted: Sat Jul 18, 2020 10:26 pm
by King Colby
I told my father in law about NTPs lights and he went and doubled down and ordered the 12000 lumens ones for 32 bucks each. :lol:
Holy **** they make 12k?

Home Improvement Thread

Posted: Sat Jul 18, 2020 11:20 pm
by mac5155
I told my father in law about NTPs lights and he went and doubled down and ordered the 12000 lumens ones for 32 bucks each. :lol:
Holy **** they make 12k?
They sure shittin do. My FIL bought 5 and paid like 175 bucks. Lol

Home Improvement Thread

Posted: Sat Jul 18, 2020 11:38 pm
by Ad@m
Is this the one?


Home Improvement Thread

Posted: Sun Jul 19, 2020 6:05 am
by mac5155
Yup :lol:

Home Improvement Thread

Posted: Sun Jul 19, 2020 7:15 am
by NTP66
Oh ****, I forgot about my attic lights, so I need a few more. All of these fixtures are 60w max, so I can’t go for that 12k lumen model. That seems like fun until you accidentally look into the light and are blind for the next 12 weeks.

Home Improvement Thread

Posted: Sun Jul 19, 2020 11:18 am
by scb147
What's the minimum amount of space needed around the fixture to screw it in? The fixture in my garage is next to a bracket for the garage door, and I'm not sure if I can screw it in. I couldn't find anything in the Amazon QA about this.

Home Improvement Thread

Posted: Sun Jul 19, 2020 11:52 am
by NTP66
What's the minimum amount of space needed around the fixture to screw it in? The fixture in my garage is next to a bracket for the garage door, and I'm not sure if I can screw it in. I couldn't find anything in the Amazon QA about this.
You need 7” from the center of the fixture to the furthest end of the wing on these LEDs for them to clear.

Home Improvement Thread

Posted: Sun Jul 19, 2020 1:20 pm
by scb147
What's the minimum amount of space needed around the fixture to screw it in? The fixture in my garage is next to a bracket for the garage door, and I'm not sure if I can screw it in. I couldn't find anything in the Amazon QA about this.
You need 7” from the center of the fixture to the furthest end of the wing on these LEDs for them to clear.
Thanks!

Home Improvement Thread

Posted: Sun Jul 19, 2020 1:31 pm
by Nuge
I got one for the unfinished part of my basement. Holy **** what a difference.

Home Improvement Thread

Posted: Sun Jul 19, 2020 3:27 pm
by LITT
Impressive impact of a positive review on sales here

Home Improvement Thread

Posted: Sun Jul 19, 2020 4:30 pm
by NTP66
I shall make face mask recommendations on Facebook next.

Home Improvement Thread

Posted: Sun Jul 19, 2020 4:32 pm
by skullman80
I got mine today. One in the laundry room one in the garage...huge difference.

Home Improvement Thread

Posted: Sun Jul 19, 2020 6:18 pm
by LITT
So my drawer box is approx 17” wide and the housing is approx 18.5”. I Need .5” play on each side for drawer hardware. Any suggestions on how to accommodate for the other .25” should I make some spacers on the table saw?
I planed down some scrap 2x4 and worked like a charm. Thanks for the suggestions.

Home Improvement Thread

Posted: Mon Jul 20, 2020 10:58 pm
by dodint
Pro tip, my dudes. DO NOT look directly into those garage lights the first time you turn it on. Jesus.

I put one in our breezeway and will be seeing spots until tomorrow.

Home Improvement Thread

Posted: Tue Jul 21, 2020 6:03 am
by NTP66
Pro tip, my dudes. DO NOT look directly into those garage lights the first time you turn it on. Jesus.

I put one in our breezeway and will be seeing spots until tomorrow.
You must have missed this:
Just don't stare into those LED lights, unless you want to see what heaven supposedly looks like.

Home Improvement Thread

Posted: Tue Jul 21, 2020 6:33 am
by shafnutz05
:lol:

Home Improvement Thread

Posted: Tue Jul 21, 2020 9:11 am
by dodint
I'm missing everything for the time being. ;)

Home Improvement Thread

Posted: Tue Jul 21, 2020 9:43 am
by King Colby
What's the minimum amount of space needed around the fixture to screw it in? The fixture in my garage is next to a bracket for the garage door, and I'm not sure if I can screw it in. I couldn't find anything in the Amazon QA about this.
You need 7” from the center of the fixture to the furthest end of the wing on these LEDs for them to clear.
Thanks!
I had the same problem and just left it partially folded. My box came with socket extenders too so those helped

Home Improvement Thread

Posted: Tue Jul 21, 2020 9:44 am
by King Colby
Pro tip, my dudes. DO NOT look directly into those garage lights the first time you turn it on. Jesus.

I put one in our breezeway and will be seeing spots until tomorrow.
I had to Google breezeway

Home Improvement Thread

Posted: Tue Jul 21, 2020 9:46 am
by dodint
Well, it's been closed in so it's not a proper breezeway anymore. Closer to a mud room, but that's not right either as the floor is finished in cement. Foyer isn't right either.

Either way it's lit af right now.